Paradox New Communication Ecosystem 

🚀 SECURimport presents Paradox New Communication Ecosystem with IPC10 receiver and MQTT technology for SWAN, CMSB and BlueEye servers. Cloud connectivity for IP180, IP150+, PCS265V7 modules, and Paradox APP. More reliable. Fast and supervised. IPC10 in SECURimport 

​Paradox MQTT Ecosystem for SWAN, CMSB and BlueEye is a light message protocol guarantying a reliable and agile communication between devices. With its advanced encryption and enhanced compatibility, it raises security standards to a higher level.

IP180 communication module is used for remote data transmission to Paradox systems via Internet. Through Paradox IP10 central Receiver, sending CMS reports to central station.

• It is needed to acquire the new IPC10 receiver.
• Important: new MQTT devices will not be compatible with previous versions of receivers.
• All legacy modules not compatible with MQTT technology will not work with IPC10.
• MQTT IP150+ V6.00.057 and PCS265V8 versions are available to installers’ level.
• It is important to consider that if we update old devices to newer versions, the current ARC (alarm receiving centre) will be lost. 

IMPORTANT | Firmware Compatibility Table for Modules and Receivers
[Module | Last Firmware | Compatible with]​
[Control panel with dual communication path installation
Module | Compatible with]

Note 1

If an IP module and a PCS are installed in the same central, firmware from both must be compatible with the same receiver they will transmit to.​

Note 2

New versions do not work in combination with the ComCable, both communicators must be directly connected to the board on the control panels with two serial ports. 

Note3

The IP180, pcs265v8, pvs265v7 Fw 8.00.0066, and IP150+ Fw 6.00.0057 modules are only compatible with the BlueEye App.

MQTT Technology Products